Safety and maintenance of equipment in organic fertilizer production line
The npk manufacturing process mainly includes feeder, double roller granulator, dryer, cooler, drum screening machine, finished product warehouse, automatic packaging machine, etc. It is necessary to master the functions of the equipment, be familiar with the non-organic fertilizer equipment, maintenance essentials, Operation methods of consumption capacity and scope of application, familiar with the functions of all controllers and alarm devices of organic fertilizer processing equipment. At the same time, we must pay attention to the safety accidents that may occur when the equipment is continuously operated under high pressure and low temperature. Various problems that may occur in organic fertilizer processing equipment. When there is organic fertilizer equipment production, we must pay attention to safety. We can only work better when we have security. At the same time, pay attention to the daily maintenance of the equipment.
1. Keep the machine clean. After use, the stains and debris outside the organic fertilizer granulator should be removed, coated with black oil, waste oil, etc, and covered with a protective cover.
2. Deal with corroded and damaged parts in time. When the equipment is not working, the corroded or damaged parts in the equipment should be removed, especially the motor, reducer, conveyor belt, transmission chain, etc.
3. Pay attention to the operation of the organic fertilizer equipment. Once serious abnormal noise is found, the npk fertilizer production line inspection should be stopped immediately and used after troubleshooting.
4. For outdoor organic fertilizer equipment, the deformed part should be leveled or erected to remove the factors causing deformation.
5. When the organic fertilizer equipment is overhauled, the working gap should be re-measured each time and adjusted several times. It can only be used if the standard is met.
6. Do a good job of thermal insulation. The drive part of the fertilizer equipment may start slowly or fail to start due to freezing. Therefore, insulation measures can be taken. At the same time, antifreeze is also used for raw materials commonly used in the operation of organic fertilizer equipment.https://www.thefertilizermachine.com/